Essentially, a sewage treatment plant operates by circulating air to encourage the growth of bacteria to break down sewage. The goal is to deliver much cleaner, more environmentally friendly effluent. It involves a similar process to a typical septic tank but has some key differences. Sewage treatment plants, depending on their size, can treat the waste of commercial properties or several domestic dwellings.
The general construction of a sewage treatment plant doesn’t differ too drastically from that of a septic tank. Just as with a septic tank, sewage flows from the property being serviced into the first chamber of the sewage treatment plant. Here, the water sits until grease, oil and scum have floated to the top and solids have settled on the bottom of the tank.
Once the process of separation has taken place, the liquid travels into a second chamber which is where sewage treatment plants differ from septic tanks. This chamber is fitted with an air pump that circulates air around the chamber to encourage the growth of aerobic bacteria. This bacteria helps to break down the contaminants in the water, effectively cleaning it.
The final stage of a sewage treatment plant is one last settlement tank. This final tank allows the very last solids that may remain to sink to the bottom of the tank before the effluent is discharged into a soakaway or watercourse.
Once the treatment process has been completed and the wastewater has been treated as thoroughly as possible, it can be discharged into the environment. This is another key area where sewage treatment plants differ from sewage treatment plants. Whereas you must discharge effluent from a septic tank into a soakaway for further treatment in the ground, subject to an Environment Agency Consent to Discharge, you can discharge your effluent into local water sources straight from your treatment plant. This is because of the vastly improved effluent quality that the treatment process produces.
The first thought for anyone planning a new development should be getting connected to the main sewers. They are typically the most cost-effective and reliable method of dealing with your wastewater. However, getting a mains sewer connection isn’t always possible. In some scenarios, the distance from the nearest sewer or the layout of the land can make it impossible to have your property serviced by a main sewer. That’s where sewage treatment plants and other alternatives come in. The operation of a sewage treatment plant means that you can have one installed almost anywhere, as long as you have an electrical connection.
The purpose of a sewage treatment plant is to treat the wastewater as thoroughly as practically possible – and, even though such plants can often deal with more waste than a septic tank, they will still need emptying from time to time. Over time, sludge can also build up in the system, so it’s important that a treatment plant is regularly maintained at least once a year or as you are advised by the installer.
Regular maintenance of pumping systems is essential, especially where the pump is part of a sewage treatment system. The point of maintenance is to avoid breakdowns of these critical systems by regular servicing and replacement of any parts that are worn or no longer fit for purpose.
Regular sewage treatment plant maintenance will help your system to run more efficiently and may reduce its energy usage. System reliability will be improved, enabling you to avoid expensive breakdowns. In addition, as an organization or individual running one of these systems, you have a duty of care to the public to ensure that the system is operating hygienically. One way to discharge this duty is to have a documented maintenance schedule that shows that you have had the system inspected by experts and are therefore running the system responsibly.
A well-maintained pumping system should last longer than a poorly maintained one and therefore the maintenance will be cost-effective in the long term. We can offer competitive servicing and maintenance arrangements for a range of clients.
We will work with you to establish a sensible servicing and maintenance regime for your particular installation, whether it is large or small. A sound schedule for sewage treatment plant maintenance should forestall many problems before they happen.
• Realtime water monitoring
• Automated System for Motors, Blowers
• Water leakage and wastage arrest
• Save Energy and Improve the Efficiency of STP
• Facilitate Solar Grid setup for STP & Street lights
• Pollution control board-approved lab reports
• Plant Preventive maintenance
• Plant revamp support
• Daily reports
• Back-End SME Support 24*7
• Core Team PhD. Holders of Chemistry to solve your problems.
Jagadeesh P
CEO, Founder & FMS Auditor @ Facilus Facility Management Pvt Ltd.
Mail ID: jagadeesh.p@facilusfms.com
Mobile No: +91 87470 78508
Website: www.facilusfms.com
Address: 20/1, 2nd Floor, 14th Cross Rd, opp. to SBI Bank ATM, 1st Block, Rajajinagar, Bengaluru, Karnataka 560010